It takes its name from its rated power output of 747 horsepower: To mark the farewell of the Ferrari 430 Scuderia, NOVITEC ROSSO presents the Edizione 747. The world’s leading tuner of the super cars from Maranello turns the lightweight model into one of the most powerful super sports cars of our time. And with its matte yellow and grey paintjob it is also one of the most spectacular-looking cars of our time. At the heart of this special model lies the new NOVITEC ROSSO 747 Bi-Compressor engine that boosts power output of the V8 that normally produces 510 hp / 375 kW by 237 hp / 174 kW. Driving performance improves accordingly: With a sprint time for 0 – 100 km/h of less than 3.4 seconds, 9.4 seconds to 200 km/h and just 22.9 seconds to 300 km/h the NOVITEC ROSSO model is the most powerful and quickest Scuderia in the world. Just as impressive is the top speed of 351 km/h.

If you don’t go forward, you go backwards. The NOVITEC ROSSO specialists have developed a new evolutionary stage of the NOVITEC ROSSO Bi-Compressor version of the four-valve eight-cylinder engine to commemorate the end of the production run of the Ferrari 430 model series.

The Edizione 747 specification is the ultimate high-end version and is limited exclusively to the Berlinetta model of the Ferrari 430 Scuderia. The layout of the engine conversion corresponds to all NOVITEC ROSSO Bi-Compressor conversions for the mid-engine sports car. Each cylinder bank is fitted with an intercooler and a cogged-belt-driven high-performance supercharger with a maximum boost pressure increased for this version to 0.53 bar. The intercooling system features its own dedicated water circuit. The radiator of the system is located behind a special centrally placed air duct in the front apron.

For an optimized supply of cooling air to the engine bay the specialists have developed a special underbody with integrated air deflector. The precompressed air is routed to the combustion chambers using a custom-tailored heat-insulated intake manifold with larger cross sections. Eight high-flow injectors ensure adequate fuel supply for the compressor conversion.

The NOVITEC ROSSO engine management system perfectly synchs all high performance components and also increases redline speed by 200 rpm. To guarantee perfect durability even under high ambient temperatures the conversion also includes more effective radiators for water and oil.

The result of this labor is a unique symbiosis of superior power and excellent running smoothness. With a rated power output of 747 hp / 549 kW at 8,500 rpm the NOVITEC ROSSO Edizione 747 Bi-Compressor engine surpasses its naturally aspirated brethren by 237 hp / 174 kW. The increase in torque from standard 470 Nm to 738 Nm at 6,300 rpm represents an enormous plus in low-speed power. Driving performance is in an automotive class of its own: A sprint time of less than 3.4 seconds for 0 –100 km/h is just as unique as the sprint time of 9.4 seconds to 200 km/h. After 22.9 seconds the NOVITEC ROSSO Edizione 747 already reaches the 300-km/h mark. Upon customer request the two-seater can be equipped with longer gear ratios for a top speed of 351 km/h.

In addition the NOVITEC ROSSO Edizione 747 is also the perfect eye catcher: The two-tone special matte yellow and grey paintjob emphasizes the sporty shape of the body and lends the Scuderia pedigreed racing looks. To complement these looks NOVITEC ROSSO installs black taillights, side markers and reflectors. The racing theme dominates also the engine’s appearance: All carbon-fiber engine components come with a matte finish.

This color scheme continues on the NOVITEC ROSSO tire/wheel combination custom-tailored for the Scuderia. The diameter of the wheels surpasses the production wheels by one inch. The three-piece 20-inch NF3 double-spoke wheels in sizes 8.5Jx20 in front and 12Jx20 on the rear axle are fitted with Michelin Pilot Cup sport tires in sizes 245/30 ZR 20 in front and 315/25 ZR 20 in back. Another measure to achieve even more agile and direct handling is the installation of NOVITEC ROSSO sport springs, which lower the ride height of the Ferrari by some 30 millimeters.

To lend the Scuderia better suitability for everyday use despite the lowering NOVITEC ROSSO offers an innovative hydraulic lift system for the front axle. At the push of a button in the cockpit the front is raised by 40 millimeters. It allows drivers to safely navigate parking ramps, low curbs and speed bumps. After safely passing over the obstacle, another push of the button reverts the suspension to its original position. If the button is not pushed the front end reverts to its original position automatically once the car reaches a speed of 80 km/h.

NOVITEC ROSSO also adds sporty and exclusive highlights to the interior of the Edizione 747. The Supersport steering wheel features a combination of leather and carbon-fiber and offers perfect grip. Its flattened bottom also makes entering and exiting the vehicle easier. To complement the steering wheel NOVITEC ROSSO offers carbon-fiber shift paddles. They are longer than their production counterparts and make manual shifting of the F1-SuperFast2 transmission even easier. In addition, upon customer request NOVITEC ROSSO equips the coupe with a two tone interior perfectly matched to the exterior colors.

[View with PicLens]

The Audi R8 4.2 V8 Enigma comprises an ECU re-calibration, carbon fibre air-intake and performance exhaust that increases peak-power to 460 PS (338 KW) 465 NM. The 5.2 V10 version develops 565 PS (415 KW) 560 NM with a simple ECU re-calibration alone. By adding high-flow sports air filters and performance exhaust system, peak-power for the 5.2 V10 increases to 600 PS (441 KW) 585 NM.

The high-performance exhaust valves are operated via remote control and can be driven in cruise, sport or open mode. The Enigma tuning programme includes 20-inch unique light weight carbon fibre/forged wheels, carbon fibre/alacantra steering wheel and carbon fibre interior inserts. A carbon fibre front lip and rear diffuser are optional extras.

The option of supercharging the 4.2 V8 is available, and when combined with other engine upgrades, increases total output to an impressive 530 PS (390KW) 600NM. Uprated brakes, including 8-pot front and 6-pot rear calipers are fitted to accommodate the additional power. Additional upgrades options include race suspension kits or race hydraulic lift systems.

For more information please visit RENM performance

[View with PicLens]

The core part of the overall makeover is the entirely re-engineered aerodynamics concept by GEMBALLA. Without any exception, the manufacturer produces all components in real carbon in order to combine lowest weight with highest material strength.

Active aerodynamics for the maximum driving experience
Owing to the active aerodynamics conception, the front spoiler lip generates an additional downthrust of up to 35 kilograms at the front axle, according to the individual position. Analogically, the flap on the newly designed rear spoiler generates even up to 85 kilograms more downthrust on the rear wheels. For optimal handling results, the flap lowers, as soon as the car reaches a speed of 120 km/h. In this way, the GEMBALLA-aerodynamics concept adjusts to the outer conditions and always ensures perfect road holding characteristics. All components of the aerodynamics kit attribute to this: starting from the new front skirt with spoiler lip, over the door extensions to the diffuser and rear spoiler.

The air duct system of the GEMBALLA MIG-U1 does not only help bringing the power of the twelve-cylinder car onto the road. At the same time, the engineers from Leonberg (Baden-Württemberg) develop an extensive ventilation- and cooling concept. Here, both the front and the back wheel-houses are supplied with cooling air and this guarantees an optimal use of the high performance braking system. The outlets behind the wheels ensure that the heated air does not pile up. Moreover, the air inlets behind the doors and on the roof supply fresh air into engine compartment behind the passenger cabin. The newly designed air exhaust ducts end in and on top of the rear skirt. Their dimensions also allow the supply of an additional radiator.

The GEMBALLA car body components therefore guarantee the functionality of the new super sports car and provide the car with a unique look at the same time. Following the design of Formula-1 racing cars, the GEMBALLA MIG-U1 has an extended front and an edged rear spoiler. Formerly rounded edges were replaced in order to provide the car with an aggressive look with greedy air inlets and outlets.

Even the rear lights do not remain openly on the back, but are cased and equipped with air ducts. The MIG-U1 grows broader by 80 millimetres at the front- and 100 millimetres at the back axle.

For everyday use, the optional electro-hydraulic height-adjustment (HLS) is extremely innovative and enormously helpful. By pushing a button in the passenger compartment, it is possible to lift the body by 45 millimetres at the front- and rear axle and therefore allows driving over obstacles such as underground car park entrances and traffic ramps. Also by pushing a button or by reaching 80 km/h, the MIG-U1 lowers itself to its original level. Additionally, the multiple adjustable sports suspension which is equipped with ball bearing bushes significantly improves the handling and driving comfort of the MIG-U1.

The forged wheels GEMBALLA GTR RACING forged by our development partner “Advanced Structural Alloys” contribute both to the appearance and the performance of the car. The wheels which are made from a massive light alloy block combined highest stability with an extremely light weight. The elaborate forging process reduces the unsprung masses of one wheel set by 16 kilograms. Therefore, the wheels respond in an even more agile way and precisely follow every steering command even under highest strains. At the front, the 10×19 inch rims hold high-performance wheels in the dimension 265/35, while the back axle transfers the power of the engine through 13×20 inch rims with 335/30 wheels.

The twelve cylinder engine of the GEMBALLA MIG-U1 works with an optimised motor management and an especially adjusted exhaust system. This combination allows a performance output of 700 hp (515 kW). The four-pipe system with pneumatic flap control is added to the sports catalyser. The end-pipes are equipped with the typical GEMBALLA heat shield and share the exit into the rear skirt with the exhaust ducts of the rear wheel houses.

High-End for the interior
In the interior, GEMBALLA devises a control centre which perfectly combines functionality and comfort. The especially for the GEMBALLA MIG-U1 designed seats, the custom-made centre console and the sports steering wheel with its leather-ultra suede combination guarantee full control over the car. At the same time, the interior of this super sports car reflects pure luxury. All interior components are lined with leather and ultra suede. The integrated high-end multimedia system offers a seven-inch touch screen, navigation, DVD changer and an iPod connection. The 950-Watt amplifier operates the high frequency ranges in the cockpit front, the 165 millimetre large membrane on the door linings and the subwoofer between the seats. GEMBALLA-logos on the seats, the floor mats and the safety belts perfect the refinement.

With the GEMBALLA MIG-U1, the automobile manufacturer once again proves that its know-how is not only limited to Porsche cars. On the basis of the already exhilarating Ferrari Enzo, the engineers developed a unique car. But even the limited edition with only 25 cars is not exclusive enough for GEMBALLA. Therefore, every single GEMBALLA MIG-U1 is individually adjusted. This ensures that there will not be any identical cars. Therefore, the specialist with its reputation for unique high-end refinement once again meets the requirements for highest individuality.

[View with PicLens]

Karl Geiger’s latest creation lives up to its name: the super sports car’s 5.4 litre V8 engine can reach a terrific 790 horsepower, an impressive 240 HP more than its series equivalent. The source of this explosion of power? Above all the replacement of the series-produced 2.3 litre with a more powerful 4.0 litre compressor which blasts the combustion chamber at over 1.25 bars. Larger throttle valves and a sports filter were also installed to supply the eight cylinders with even more fresh air. The engine and gear cooling systems had of course also to be adjusted to the new design as well as engine electrics.

Geiger HP 790 shoots to 100km/h in just 3.6 seconds, breaks the 200km/h mark 6 seconds later and reaches 300 kilometres an hour in only 22.8 seconds – all this to bloodcurdling roars from the two 110-millimetre sports exhaust tail pipes – an in house development. Thrust and air resistance don’t balance until you hit 360km/h. The supercharged V8 reaches maximum power at 6320 rpm and its maximum torque – 863 Newton metres – at just 4600 revolutions.

No question that a ride like this is not for the beginner, but experienced drivers will find the specially developed coilover suspension a great asset. Its hydraulic shock absorbers have adjustable pressure and rebound damping which can be set to suit drivers’ needs and preferences – and of course the terrain.

Low and wide: the classic Ford sports car proportions are taken even further with 60-millimetere lowering. The wheel housing can’t high superb matt black alloy wheels outlined in the car colour, mounted in 9×20 inches at the front and an impressive 11×21 at the rear. 245/35R20 Dunlop SP Sport Maxx tyres on the front axle ensure precise transmission of wheel commands whilst the drive axle 325/30R21 tyres constantly fight for grip and traction – if only so they don’t disappear in a cloud of blue smoke.

[View with PicLens]

The exterior received a special polyurethane bodykit, contending stylish sideskirts, aprons in the front as well as rear and a rear lid spoiler what gives the elegant britain a more aggressive look.

The stock version of the 6.0L V12 is coming with 476hp, too less for the tuning enthusiasts adding enormous 60hp and 50 lb-ft of torque with an ECU upgrade, special 200 cells sportcatalysts and a valve controlled, stainless steel exhaust system. Because of the remote controlled exhaust system the car now sounds like a V12 should sound, if the driver wants it.

Adding to the exterior customizations wheelsandmore took a wheelset from their exclusive series, shown at www.kahn-felgen.net.

The specifications of the front Kahn RS-V wheels are 9.0×20 inches diameter and are wrapped in some of the best performance tires; the Dunlop Sport Maxx 255/35/20. The rear Kahn RS-V wheels are 11.0×20 inches and therefore needed the larger 285/30/20 tires.

H&R themselves customized a springset especially for wheelsandmore´s DB9 convertible, lowering the car around 25mm for a sportier look and a better handling.

Prices

Wheelset RS-V 9,0+11,0×20 with 255/35/20 and 285/30/20 – 5999 EURO
Bodykit inkl. installation and lacquering – 9000 EURO
Exhaustsystem, contending valve controlled exhaust
and 200 cells sport catalysts – 8800 EURO
ECU upgrade within v-max abilition – 3400 EURO
Special lowering springs – 1150 EURO

[View with PicLens]

A bump in displacement from 6.0 to 6.3 liters, new camshafts, new titanium valve spring retainers and connecting rods, modified cylinder heads, new high performance exhaust headers, high flow catalytic converters, mufflers and air filters: that’s the scope of edo competition’s engine modifications. The standard hydraulic tappets are replaced with newly developed solid tappets, enabling the 12 cylinder engine to rev to an incredible 9,600 rpm. This is unmatched by any other 12 cylinder engine at this time! Additionally the intake system of the V12 was modified, a new high performance clutch – available with „strada“ or „pista“ friction pads – and a more powerful oil pump were installed. The power output is increased by 180 to 840 horsepower. Without mufflers more than 860 horsepower is possible. The maximum torque of 780 Nm (575 ft-lb) is available at 5,800 rpm.

While the power output is increased, the Enzo’s weight is decreased by a respectable 100 kilograms (220 lb). The result in numerical terms is that the edo Enzo XX Evolution accelerates from zero to 100 km/h (62 mph) in 3.2 seconds, 200 km/h (124 mph) in 9.0 seconds and 300 km/h in just 19 seconds. The top speed exceeds 390 km/h (242 mph).

The acoustical side of things is obviously not being neglected. A stainless steel muffler featuring remote-controlled butterfly valves is available on request. This setup lets the driver switch the high performance exhaust between two different sound levels.

Astonishing transmission shift times: While the production Enzo takes 110 milliseconds, the edo Enzo XX Evolution shift times were reduced to an incredible 60 milliseconds! For comparison, an F1 car shifts in 40 milliseconds.

The edo/KW race suspension from the FIA GT series was retuned for the Enzo XX Evolution, promising ultimate driving dynamics. The nose lift functionality is retained. The low-friction 3-way adjustable shock absorbers can be adjusted to the individual tastes of the driver and provide excellent steering precision and feedback. The edoinstalled tire pressure monitoring system displays the pressures for each of the four wheels. Providing ample grip for the edo Enzo XX Evolution are 19 inch front wheels and 20 inch rear wheels with 335 mm wide tires. The drive shafts were replaced due to the higher propulsive forces acting on them. The new units are 4 kg (8.8 lb) lighter and considerably more robust in order to cope with the enormous power increase.

The aerodynamics package is absolutely unique.

It includes a complete exhaust system with tips machined from billet aluminum, now relocated to the top of the body. The tips are plasma-coated using a special process. The newly developed rear skirt featuring winglets and a rear wing profile, adjustable in 3 steps, improves the ground effect and can be tuned to the tastes of the driver. The new retractable rear wing is upgraded with a taller flap resulting in increased downforce and stability, especially at high speeds. New LED tail lights round off the rear view of the car.

A test day with an instructor, mechanics, data logging, transport and hospitality is included in the conversion package.

All modifications are carried out exclusively at edo competition Motorsport GmbH in Ahlen.

[View with PicLens]

The company owner, Kourosh Mansory already follows this trail with the newly designed Vitesse Rosé which now celebrates its world premiere at the Frankfurt Motor Show.

Extravagant eye-catcher in unsurpassable quality
The exclusive MANSORY aerodynamics package sets benchmarks in quality and appearance. On the one hand, the car body components made of PU-RIM perfectly integrate into the original design, but also render a significant dynamic style. Front- and rear apron in connection with the side skirts form a unit and do not only present a visual and colour-coordinated refinement. LED daylight running lights which are integrated in the front apron render additional passive safety and in combination with the carbon fibre bonnet they enhance the dynamic look of the two-door car. In addition, the component parts optimise the air duct over the car silhouette which renders positive effects on the handling. The necessary extra downforce can be attributed to the carbon rear lip which perfectly flows into the shape of the boot lid and prevents any troubles with the traction

Top-class twelve-cylinder sound
The newly developed stainless steel exhaust system with two angular, overlapping chrome end pipes render a striking note to the tail and supply the twelve-cylinder with an earthy rumbling sound.

High-tech rims for best road holding
In order to draw level with the extra performance, MANSORY developed a light alloy wheel measuring 10.5 x 21 inches. By using weight-saving aluminium alloys and the therefore resulting reduction of the unsprung masses, not only the braking distance, but also the handling is significantly improved. In co-operation with Dunlop, high-performance wheels type Dunlop Sport Maxx GT measuring 285/30 ZR 21 were developed. Moreover, the newly designed control unit for air suspension which allows lowering the sports car´s centre of gravity in different levels, renders additional dynamic high-lights.

Premium and extensive interior programme
MANSORY achieves the perfect symbiosis between dynamic functionality and luxurious ambience. Premium materials are chosen for the interior and enhance the comfort. The leather is processed by expert hand and is extremely resilient and still extraordinarily soft. With its individual grain and the manually applied decorative stitching, everything around the newly designed airbag sports steering wheel renders an extravagant atmosphere. The pedals are made of aluminium and in combination with the carbon fibre applications the exclusive interior of the Vitesse Rosé comes to perfection.

The price for the limited Vitesse Rosé starts at 269,000 euros.

For more information about the exclusive MANSORY refining programme for the Bentley Continental GT Speed, please visit the web site www.mansory.com The MANSORY Cooperation GmbH solely offers its own modification accessory. MANSORY does not deal with entire cars and also does not offer them for sale.

[View with PicLens]

Appropriately named Helvellyn Frost, this frozen matte white …Aston takes its name from a mountain range in England. This mountain epitomizes romance and beauty with a dash of treachery just as this V8 Vantage does.

The Aston Vantage is undoubtedly a stunningly beautiful car straight from the factory. To enhance her looks without becoming ostentatious, every curve had to be considered. It is a very easy process to add aftermarket parts to these cars, but also very easy to disturb the balance of beauty, proportion and classiness.

To ensure that the whole theme would work, MWDesign first created a concept render to digitally “test fit” the entire styling package down to the most subtle detail.

The first task was to pick a color scheme to go with. The car came from the factory finished in an already beautiful Tungsten Grey with 2 tone red/black interior and red callipers. To accentuate the lines and create a more mystical subdued glow, a crisp pure matte white was selected. This concept was executed beautifully by the pros at GPFX.

After the full color conversion, RSC (Racing Sports Concepts) came into the equation for subtle aerodynamics additions and serious power upgrades. For this project, MWDesign placed a special order for these aero pieces in matte carbon fiber to flow with the muted exterior reflectivity. The carbon pieces fit flawlessly and were given the matte white 2 tone effect to flow into the rest of the bodywork.

Next on the agenda was to upgrade the stance of the Aston with wheels and suspension. To achieve this, first H&R suspension was installed to get the proper ride height. For wheels, MWDesign immediately called their good friends at Modulare wheels to fabricate a custom set of wheels for the Vantage. MWDesign’s prototype included a matte black lip and a highly textured tinted brushed aluminum face reminiscent of a clearcoated version of the TiAN finish found on some of the world’s most exclusive watches. After some design revisions, MWDesign applied their concept to Modulare’s then unreleased M14 wheel style. This finish was combined with piano black hardware and aluminum center cap with small body color accents. These highly detailed wheels are glued to the road via Michelin Pilot Sport PS2’s measuring 255/35/20 in the front and 285/25/20 in the rear.

After the major modifications were complete, the fine styling details had to be addressed. In MWDesign’s opinion, often these small accents are the “make or break” features in their projects. To match the matte theme and the matte black wheel lips, matte black was applied to the side vents, front grill, window trims and trunk lip area. DBS style clear tails were added to the rear to create a lighter, more airy feel to the body of the car. The solid Ferrari Red callipers were entirely too flashy for the vehicle and had to be subdued. The callipers were pulled out and powdercoated in a frost white with carbon fiber plate to match the body. To retain a more subtle tie with the red interior, the Brembo calliper’s bleeder line was left in red. Drawing from the influence of the GT4 Racing Vantage, removable anodized red tow hooks were installed in the front and rear giving it a small hint of red to match the interior and to pay homage to its racing counterpart.

Lastly, the Vantage’s underachieving 380hp was the final priority on the list. RSC’s Vantage-C Powerkit including a beautiful polished canister race exhaust system, high flow 200 cell catalysts and engine software retune bring this machine to a serious contender at 445hp.
The loud yet refined bark emitted from the handbuilt V8 through the free flowing exhaust produces such a beautiful note that the car feels right at home whether it be at the Glyndebourne or at Goodwood.

MWDesign | Technik would like to thank the following sponsors on this project

Our good friends over at:
RSC Racing Sports Concepts
Modulare Wheels
GPFX Graphics
Ben Lee Photography

[View with PicLens]

As is generally known however, the sport oriented motorist can never have enough power at his command. Sufficient cause for Gnther Manhart, who by now has over 25 years experience in rebuilding BMW engines – a first for Europe to transplant a brand new, much stronger heart into the Z4. The transplantation of the ten cylinder engine from the current M5 generation into the narrow engine bay of the roadster was anything but a walk in the park and it earned the Manhart Racing engineers quite a few grey hairs. Nevertheless: everything fitted in the end and now the fire of a 5.0 litre V10 engine with an impressive output of 550 HP blazes above the front axle of the Z4. A catalytic converter, a modified DME electronic control unit and the removal of the factory-set V-Max restriction up to 250 km/h are part of the rebuild. Consistent to the M5 V10 engine Manhart Racing has treated the Z4 to an original M5 E60 6 gear manual transmission which includes a Fichtel & Sachs clutch and a M5 E60 differential. An AC Schnitzer stainless steel exhaust system with four muffler tips which was fitted with HJS racing catalytic converters caters for a perfect V10 sound at the rear.

The Manhart Z4 M V10 goes like hell and thanks to the perfectly tuned Bilstein B16 PSS10 coilovers, the virtually unrestrained power of 550 HP can be brought under control to the tarmac. Black BBS Challenge wheels rotate in the wheel arches of the Manhart Z4 M V10 with 8.5Jx19 ET35 235/35ZR19 front tyres and 10Jx19 ET20 285/30ZR19 back tyres.

Conclusion: 550 HP ten cylinders, an acceleration from 0 to 100 km/h in 3.9 seconds, kerb weight 1450kg, 2.6kg per HP… who could guess that these impressive figures belong to a Z4? Hardly anyone, however Manhart Racing turns dreams into reality and does this with 25 years experience.

[View with PicLens]

TÜV certified Aerokits

Both of the new Aerokits I+II from PU-RIM implement components that were tested in a wind tunnel to optimize their drag coefficients. In addition, the downforce on both axles is perceptibly higher. Essential Aerokit components are a front spoiler with a spoiler lip that match the body’s color, side sills, and a rear area that has been optimized in terms of both design and aerodynamics. The rigid rear spoiler and a rear apron with a diffuser look ensure greater stability at extreme speeds. Both models’ exhaust systems add a sporty touch to the striking rear design. Two round TECHART exhaust tailpipes in glossy or black chrome handle the rear exhaust flow. In comparison to series models, the engine sound is more sonorous and hollow, though it yields to a powerful crescendo at the highest RPMs.

New daytime running lights system in the Aerokit II

A multifunctional daytime running lights system was developed for both TECHART’s Boxster-based Roadster design and its Cayman-based TECHART GT design. The LED system units combine daytime, idle, and parking lighting in a single cohesive housing. The different modules are elegantly integrated into the upper part of the front spoiler. The light intensity automatically adjusts to the selected driving lights setting. Moreover, the daytime running lights dim automatically when either of the turning signals is active to improve their visibility.

Sporty chassis

The performance spectrum of the new individualization options is also evident in the chassis of the Boxster and Cayman. The 19- and 20-inch aluminum wheels expertly transmit the power of these 2.9 and 3.4 liter engines to the road. The TECHART Formula, Formula II, and Formula III forged wheels both ensure abundant ventilation for the wheel arches and allow the braking systems to be seen. The tight alignment of TECHART’s set of sport springs directly permit any steering angles. Thanks to TECHART’s Vario and VarioPlus threaded suspension chassis, the models can be lowered up to 30 mm during assembly and optimally adapted to suit the individual demands for each vehicle. To ensure sufficient traction for this high-performance system, TECHART recommends the Conti Pneu Sport Contact 3.

Exclusive interiors

Because TECHART runs its own saddlery, it can offer a nearly limitless variety of custom interior designs. For instance, the interior can be completely outfitted with the finest leather and decorative seams in contrasting colors. Moreover, carbon interior packages I+II further expand the options for high-quality stylizing of all ornamentation. Additional accessories like aluminum sport pedals, a 3-spoked sport steering wheel, or illuminated entry sills with individual logos round out the diverse options for the design of the interior.

[View with PicLens]